Network troubleshooting technician providing live chat help

Joe B.

Reviewed for technical accuracy

Specialities: Home networking, Wi-Fi routers, modems, Windows/macOS internet issues, Wi-Fi security & passwords, DNS & IP configuration, ISP setup

Fix Wi-Fi not working after changing password — “incorrect password”, can’t connect, no internet

Technician avatar Technician
Hi! We’ll get your Wi-Fi not working after changing password issue fixed and all your devices reconnected. I just need a quick picture of what changed.

Did you change the Wi-Fi network password (the one devices use to join the network), the router’s admin password, or both? After the change, do your phones/laptops show an “incorrect password” or “can’t connect to this network” message, or do they connect but show “no internet”?

Also, did you change the Wi-Fi name (SSID) or only the password, and do you see one network (for example “HomeWiFi”) or separate 2.4 GHz / 5 GHz networks (like “HomeWiFi” and “HomeWiFi_5G”) in the Wi-Fi list?
Customer
I only changed the Wi-Fi password in the router settings, not the admin login. Same network name as before. Now all our phones and my Windows 11 laptop either say “incorrect password” or just keep spinning and then show “can’t connect to this network”. The desktop that’s wired with Ethernet still has internet, so it’s just Wi-Fi that stopped working after the password change.
Technician avatar Technician
Perfect, that detail helps a lot. When Wi-Fi stops working after changing the password but Ethernet still works, the internet connection itself is fine — what’s broken is how devices authenticate to the wireless network.

The most common causes are:
• Devices are still using the old saved Wi-Fi password in the background, even if you type the new one on top.
• The router is broadcasting a slightly different SSID or security type (for example, switched from WPA2 to WPA3), and some older devices don’t like it.
• There’s a mismatch between the router’s Wi-Fi band or channel and what the device expects (2.4 GHz vs 5 GHz), which sometimes shows up as endless “incorrect password” messages.
• One device has corrupted Wi-Fi profile / network settings, so even the correct password fails until we clear and rebuild that profile.

We’ll confirm that the router is broadcasting correctly and then take you through the right “forget network and reconnect” steps on each type of device so everything accepts the new Wi-Fi password.
Customer
That sounds like what’s happening. I tried entering the new password on my laptop and phone, but they still complain it’s wrong. The network name is the same as before, and I see both “HomeWiFi” and “HomeWiFi_5G”. My smart TV and a couple of smart plugs also went offline right after I changed the Wi-Fi password.
Technician avatar Technician
Great, let’s first make sure the router has the password we think it has and that both bands match.

Step A — Confirm the new Wi-Fi password on the router
1) From the wired desktop (the one that still has internet), open a browser and log into the router’s admin page (something like 192.168.0.1 or 192.168.1.1).
2) Go to the Wireless / Wi-Fi settings. Look for the name (SSID) and security / password for each band (2.4 GHz and 5 GHz).
3) Confirm:
  • Both bands use the same Wi-Fi password you intend to use.
  • Security type is set to a mode your devices support (for example WPA2-Personal (AES) or “WPA2/WPA3 mixed” rather than WPA3-only for older devices).
4) Very carefully copy the Wi-Fi password into a text file on the desktop so we can be 100% sure we’re typing it exactly the same — watch for similar characters like 0/O and 1/l.

Once we know the router’s password is correct, we’ll wipe the old saved network on each device and reconnect cleanly with this new password.
Customer
I checked. Both 2.4 and 5 GHz are using WPA2-Personal with the same password, and it matches what I’ve been entering. I copied it into Notepad to be sure. So the router seems to have the right Wi-Fi password, but my Windows laptop still says “can’t connect to this network” and my Android phone says “password incorrect” after a few seconds.
Technician avatar Technician
Perfect — that confirms the issue is with old saved Wi-Fi profiles on the devices, not the router password itself. This is exactly the classic “Wi-Fi not working after password change” scenario.

Step B — Forget the old Wi-Fi network on each device
On Windows 10/11 laptop:
• Click the Wi-Fi icon → Network & Internet settings → Wi-Fi → Manage known networks.
• Click your home network name and choose Forget.
• Then click the Wi-Fi icon again, select the same network, and paste/type the new password exactly from your text file.

On an Android phone:
• Go to Settings → Network & internet → Internet / Wi-Fi.
• Tap your home network, choose Forget (or “Remove” / trash icon).
• Turn Wi-Fi off and back on, tap the network name again, and enter the new password.

On an iPhone:
• Go to Settings → Wi-Fi, tap the “i” next to your network, then tap Forget This Network and confirm.
• Re-select the network from the list and enter the new password.

Try that on your laptop and phone now and tell me what messages you get — we’re aiming for a clean connect without the “incorrect password” error.
Customer
I forgot the network on both. The Android phone connected right away with the new password. On the Windows laptop, after forgetting and reconnecting, it connected but showed “No internet, secured” for a bit. After a minute, the internet started working. The iPhone still says “Unable to join the network” even with the correct password.
Technician avatar Technician
Good progress — that confirms the new Wi-Fi password works and that the router is fine. Now we just need to clean up any leftover network glitches on the stubborn devices.

Step C — Deep refresh for Windows and iPhone after Wi-Fi password change
On Windows 10/11 (since it already works, this is optional but helpful if the “No internet, secured” message returns):
1) Right-click Start → Windows Terminal (Admin) or Command Prompt (Admin).
2) Run these commands one by one:
  • ipconfig /release
  • ipconfig /renew
  • ipconfig /flushdns
3) In Network & Internet → Wi-Fi → Hardware properties, make sure IPv4 and DNS are set to Automatic (DHCP) so the laptop isn’t trying to use old static settings from before the password change.

On the iPhone:
1) Go to Settings → Wi-Fi, tap the “i” next to your home network, then make sure there’s no VPN / Private Wi-Fi address setting interfering; if the phone offers Renew Lease or “Reset network settings” steps, we can use those.
2) If “Unable to join network” keeps appearing, go to Settings → General → Transfer or Reset iPhone → Reset → Reset Network Settings. This clears all old Wi-Fi profiles and usually fixes password or authentication errors after a Wi-Fi password change.

After the reset, try connecting the iPhone again with the new Wi-Fi password. Let me know if it still refuses to join.
Customer
I ran the Windows commands just in case — it still works fine. On the iPhone, I ended up doing the “Reset Network Settings” and now it connects to the Wi-Fi with the new password. So phones and laptops are good. The only things still offline are the smart TV and some smart plugs and a camera; they just say “can’t find Wi-Fi network” or “wrong Wi-Fi password”.
Technician avatar Technician
That’s totally normal — smart TVs, plugs, cameras, printers, and other smart-home devices don’t automatically pick up the new Wi-Fi password. They still think the old one is correct until you reconfigure them.

Step D — Reconnect smart devices after changing Wi-Fi password
• For your smart TV, open its Network or Wi-Fi settings, choose your home network, and re-enter the new password. Some TVs have a “Forget network” or “Set up wireless again” option — use that first if it’s available.
• For smart plugs, cameras, bulbs, and similar gadgets, open the app you originally used to set them up (for example, Kasa, Smart Life, Alexa, Google Home, etc.) and look for a Wi-Fi or network setup section. Many require you to put the device into pairing mode and walk through the “Add device” or “Change Wi-Fi” flow with the new Wi-Fi password.
• Some older devices don’t support changing the Wi-Fi password without a full reset. In that case, press and hold the reset button until the light blinks, then run the setup wizard again as if it were new, making sure you select the right SSID and enter the updated Wi-Fi password.

Once you’ve done that for one or two devices, they should reconnect just like the phones did. Try the TV and one smart plug now and tell me if they come back online.
Customer
I redid the Wi-Fi setup on the TV and one smart plug in their apps and they both connected with the new password. Looks like I’ll just need to repeat that for the rest. Everything else — laptops, iPhone, Android, tablets — is now working fine with the new Wi-Fi password. Is there anything I should change on the router to avoid issues next time I update the password?
Technician avatar Technician
Great — that means the Wi-Fi not working after changing password problem is solved, we just have a few smart devices left to update.

To make future changes smoother:
• Try to keep the same Wi-Fi name (SSID) long-term and only change the password when necessary. Keeping the SSID stable reduces how many things break at once.
• Use a strong but memorable password, then store it in a password manager or take a photo/printout you keep somewhere safe. That way you can easily re-enter it on TVs and smart devices without guessing.
• Avoid rare characters or spaces that some older devices can’t handle — a mix of letters, numbers and a few basic symbols is usually safest.
• Make sure your router firmware is up to date and Wi-Fi security is set to WPA2 or WPA2/WPA3, not old insecure modes like WEP, which can also cause connection weirdness on modern phones and laptops.
• If you ever change both the SSID and password, plan a few minutes to go around the house and reconnect smart devices — they treat it as a completely new Wi-Fi network.

With that in place, you should only need a quick “forget and reconnect” on phones and laptops if you change the Wi-Fi password again.
Customer
That makes sense. I’ll keep the same network name from now on and just change the password if needed. I’ve written it down and will finish re-adding the rest of the smart plugs and camera. Everything important is working again now, so that’s a relief. Thanks for walking me through all of this.
Technician avatar Technician
You’re very welcome — glad we could get everything back online.

Quick recap: When Wi-Fi is not working after changing the password but wired devices still have internet, the fix is to: verify the new Wi-Fi password in the router, forget the old network on each phone, laptop, and tablet, reconnect with the updated password, then re-run Wi-Fi setup on TVs and smart-home devices. If any device still refuses to join, a network settings reset on that device almost always clears out the old password and hidden profiles.

If you ever change the password again or run into a stubborn “incorrect password” or “can’t connect to this network” error, you can open a chat with an expert and we’ll walk through it live with you.
Customer
Perfect. I understand the steps now and everything’s back on Wi-Fi. Really appreciate the detailed explanation and the checklist.
Technician avatar Technician
Anytime! If friends or family say their Wi-Fi stopped working after changing the password, their phone keeps saying “incorrect password”, or their smart TV won’t reconnect, you can share this process — or just have them start a chat with an expert and we’ll fix it with them step by step.

Quick answer: the accepted fix

Accepted fix when Wi-Fi is not working after changing the password: confirm the new Wi-Fi password and security mode in the router, then forget and reconnect to the network on each device, reboot router and devices, make sure phones and laptops use automatic IP/DNS settings, and re-run Wi-Fi setup on smart TVs and other smart-home devices so they all use the updated password.


Why Wi-Fi stops working after you change the password

Most Wi-Fi not working after changing password problems are not a broken internet connection; they’re devices trying to use the old saved password or struggling with updated security settings. Laptops, phones, and smart-home devices silently store the previous Wi-Fi credentials. When you change the password in the router, they keep sending the old one until you tell them to forget the network and reconnect.

Other common causes include changing the SSID (network name) at the same time, switching the router to a different security type (for example, WPA3-only instead of WPA2), or having different passwords on the 2.4 GHz and 5 GHz bands. Some devices will just say “incorrect password” even when you type it correctly, because the underlying Wi-Fi profile is corrupted. Separating the problem into router → phones/laptops → smart devices makes it much easier to fix.

How to check if the problem is the password, router, or device

To quickly narrow down a Wi-Fi not working after password change issue, start with the basics:

First, confirm that the internet itself works by testing a wired device (for example, a desktop connected directly to the router or modem). If wired works, your ISP connection is fine. Next, log into the router’s admin page and verify the Wi-Fi password and security mode for each band, making sure there are no typos and that 2.4 GHz and 5 GHz either share the same password or are clearly labeled.

Then look at the devices: if one phone connects with the new password but another device shows “incorrect password”, the issue is on that specific device — usually a stale Wi-Fi profile or network settings. If no device will connect with the new password, double-check the router’s configuration and consider briefly changing the password to something simple (only while testing) to rule out character-entry issues.

Wi-Fi not working after changing password — quick troubleshooting tips

Confirm the new Wi-Fi password on the router, then reset saved networks on your devices.

Fast path: confirm the new password and security type in your router’s Wi-Fi settings → reboot the router → on each phone, laptop, and tablet, forget the old Wi-Fi network and reconnect using the updated password → make sure devices use automatic IP and DNS → re-run Wi-Fi setup for TVs, printers, cameras, and smart plugs. This sequence clears old credentials and usually fixes “incorrect password”, “can’t connect to this network”, and similar messages after a Wi-Fi password change.

Disclaimer: This information is AI-generated and intended for general guidance only. For advice specific to your router model, Wi-Fi devices, and ISP, please consult a verified expert on Whizz-Tech before making decisions.


Getting Started Is Easy

Ask for help, 24/7

Members enjoy round-the-clock access to 12,000+ verified Experts for issues like Wi-Fi not working after changing password, incorrect Wi-Fi password errors, no internet after Wi-Fi change, and more.

Expert will respond in minutes

We match you with a networking specialist who knows Wi-Fi passwords, router security, Android and iOS Wi-Fi settings, and Windows/macOS network fixes so you don’t waste hours guessing why devices won’t reconnect.

Save time & money

Stop endlessly retrying the same Wi-Fi password, resetting routers, and reconnecting every device by trial and error. Get a clear step-by-step Wi-Fi reconnection plan in chat and get back online quickly.

FAQ

Why is my Wi-Fi not working after I change the password?

Most of the time, the internet itself is fine — but your devices are still trying to use the old saved Wi-Fi password. Laptops, phones, and smart devices cache credentials. After you update the password in the router, they keep sending the old one until you forget the network and reconnect. In some cases, changing the security mode or SSID at the same time can also confuse older devices and cause repeated “incorrect password” or “can’t connect to this network” errors.

How do I reconnect all my devices after changing the Wi-Fi password?

First, confirm the new password in your router’s Wireless/Wi-Fi settings. Then, on each phone, laptop, and tablet, open Wi-Fi settings, select your home network, choose Forget, and reconnect by entering the new password. For smart TVs, printers, cameras, and plugs, open their setup app or network menu and run Wi-Fi setup again, selecting your network and entering the updated password. This ensures every device is using the new credentials instead of the old ones.

What should I do if I keep getting “incorrect password” but I’m sure it’s right?

If you’re certain the router’s Wi-Fi password is correct, the issue is usually a corrupted Wi-Fi profile on the device. On Windows, use Manage known networks → Forget and reconnect, or run a quick network reset. On Android and iPhone, forget the network, restart the device, and try again. If the error persists, resetting network settings on the device usually clears hidden or conflicting settings that block authentication.

Do I need to factory reset my router if Wi-Fi stops working after a password change?

Usually no. If wired internet works and you can still log into the router, you can normally fix Wi-Fi not working after changing password by checking the Wi-Fi settings (SSID, security mode, password), then forgetting and reconnecting on each device. A factory reset is only needed if you can’t sign in to the router at all or if the wireless configuration is badly broken. Just make sure you have your ISP details and Wi-Fi name/password documented before resetting.

Sources

Matt Verified Icon
Matt ● replies in < 1 min
Technician Expert
⭐⭐⭐⭐⭐ Trusted by 27,000+ customers
Avatar
Alex · Expert's Assistant