Hi! We’ll get your MacBook Wi-Fi No IP Address problem fixed so your Mac goes back online normally. When a Mac says “Wi-Fi has the self-assigned IP address and will not be able to connect to the Internet”, it usually means it isn’t getting a proper IP from the router (DHCP).
To target the right fix, I just need a bit more info:
• Which MacBook do you have (MacBook Air / MacBook Pro) and which macOS version (Sonoma, Ventura, Monterey, Big Sur, etc.)?
• What exactly do you see in System Settings > Network > Wi-Fi — does it say “No IP address”, “Self-Assigned IP”, or something similar?
• Are other devices (phones, Windows laptops, iPad, smart TV) able to use this same Wi-Fi network and get on the internet?
• Is this error happening on all Wi-Fi networks (home, hotspot, office) or just one router?
Once I know that, we’ll walk through precise MacBook IP address and Wi-Fi troubleshooting steps to get rid of the self-assigned IP and give your Mac a real IP from the router again.
Customer
It’s a MacBook Air on macOS Ventura. In Network settings it shows Wi-Fi with a yellow dot and the message “Wi-Fi has the self-assigned IP address 169.254.xx.xx and will not be able to connect to the Internet.” Sometimes it just says “No IP address”. My phone and another laptop connect to this Wi-Fi fine. I’ve restarted the Mac and router a few times but the self-assigned IP keeps coming back.
Thanks, that tells me a lot. A MacBook Wi-Fi No IP Address or self-assigned IP 169.254.x.x message means your Mac is not getting an address from the router’s DHCP server, so macOS gives itself a temporary IP that can’t reach the internet.
Common causes for a MacBook not getting an IP address include:
• Corrupted or stuck network settings in macOS for that Wi-Fi service.
• A broken network location profile that keeps reusing bad configuration.
• The Configure IPv4 option not set to “Using DHCP” or a wrong manual IP / subnet.
• Router DHCP glitches or IP conflicts when the router “forgets” your MacBook.
We’ll go step by step: first simple Mac + router resets, then creating a clean network location, renewing the DHCP lease, and if needed, fully resetting your Mac’s Wi-Fi configuration so the message “Wi-Fi has the self-assigned IP address” disappears and you get a normal IP again.
Customer
It started randomly a few days ago. It happens mostly on my home Wi-Fi, but I saw the same self-assigned IP address error once on a public network too. I haven’t really changed any network settings. I just updated macOS recently. I don’t use any VPN right now. Sometimes it connects for a minute after a restart, then drops back to “No IP address”.
Perfect, let’s start with quick fixes that often clear a temporary MacBook not getting an IP address issue.
Step A — Basic Mac + router refresh
1) On the MacBook, click the Wi-Fi icon in the menu bar and turn Wi-Fi Off, wait 10–15 seconds, then turn it On again.
2) In System Settings > Network > Wi-Fi, click the Wi-Fi you’re using, choose “Forget This Network”, then reconnect by entering the Wi-Fi password. This forces macOS to rebuild the connection profile.
3) Restart your router / modem one more time: power it off for 30 seconds and power it back on so the DHCP server can hand out fresh IP addresses.
4) Restart the MacBook Air as well (Apple menu → Restart). On reboot, immediately join your Wi-Fi and check what it says under Wi-Fi in Network: do you still see self-assigned IP or “No IP address”, or does it show a normal 192.168.x.x / 10.x.x.x address and “Connected”?
Try those steps and tell me if the MacBook Wi-Fi No IP Address error changes or if it still shows the self-assigned IP message afterwards.
Customer
I turned Wi-Fi off/on, forgot the network, rebooted the router and restarted the Mac. After reconnecting, it briefly showed “Connected” with a 192.168 address, but a few minutes later it dropped and went back to “Wi-Fi has the self-assigned IP address 169.254…” and “No IP address” again.
That’s actually a useful clue — it means the MacBook can talk to the router but the DHCP lease or location settings are flaky. Next we’ll give macOS a clean network profile and force it to renew the IP address from the DHCP server.
Step B — Create a new Network Location & renew DHCP lease
1) Open System Settings > Network. At the top, click the three dots (…) > Locations > Edit Locations. Create a new location called something like “Home – Fresh”, then select it and click Done. This gives you a fresh set of network settings.
2) With the new location selected, click Wi-Fi in the left sidebar, connect to your home network, then click Details > TCP/IP.
3) Make sure Configure IPv4 is set to “Using DHCP” (not a manual IP). Then click the Renew DHCP Lease button. This tells the router “give this MacBook a new IP address”.
4) Click OK / Apply, wait a few seconds, and see if the IP changes from 169.254.x.x to something like 192.168.x.x or 10.x.x.x, and if the status changes from “Self-Assigned IP” to “Connected”.
After doing that, let me know if the MacBook Wi-Fi No IP Address problem goes away temporarily or stays stuck on self-assigned IP.
Customer
I created a new location and set IPv4 to “Using DHCP”, then clicked Renew DHCP Lease. It picked up a normal 192.168 address and the status shows “Connected” now. Internet works again, but I’m worried it will go back to self-assigned IP later because that’s what it’s been doing.
Good, so renewing the lease and using DHCP clearly helped — now we’ll make the fix more permanent by cleaning up the Wi-Fi service itself so your MacBook stops falling back to self-assigned IP.
Step C — Rebuild the Wi-Fi service in macOS
1) In System Settings > Network, select Wi-Fi in the sidebar and click the minus (–) button to remove the Wi-Fi service (we’ll add it back). Click Apply if prompted.
2) Click the plus (+) button, add a new Wi-Fi service, give it the default name, and click Create. This resets the Wi-Fi interface configuration.
3) Connect to your home network again, then go into Details > TCP/IP and confirm that:
• Configure IPv4: Using DHCP
• Configure IPv6: Automatically (or “Link-local only”, depending on your ISP).
4) Click Renew DHCP Lease once more and Apply. Wait 20–30 seconds and verify that it still shows a proper LAN IP and “Connected”, not “No IP address”.
5) While you’re there, check the DNS tab for anything odd (old VPN DNS servers, etc.). If you’re not sure, you can usually leave DNS empty so the router provides the servers automatically.
This rebuilds the MacBook’s Wi-Fi configuration and often stops recurring self-assigned IP address loops on macOS.
Customer
I removed and re-added Wi-Fi, set IPv4 to Using DHCP and renewed the lease again. Now it’s been stable for about 15 minutes with a normal IP and internet is working. Before, it would switch to “No IP address” much faster. Is there anything else I should check so the MacBook Wi-Fi No IP Address issue doesn’t come back?
Great, that’s a strong sign the underlying IP configuration is sorted. Let’s add a couple of deeper clean-ups and checks that help with stubborn self-assigned IP on Mac cases.
Step D — Deep clean for recurring MacBook self-assigned IP
• Make sure there’s no security software or VPN (Cisco, corporate VPN, antivirus firewall) trying to filter your Wi-Fi interface. Temporarily quitting these can rule out conflicts that stop the Mac from getting an IP address.
• In System Settings > Network > Wi-Fi > Details, confirm there are no old manual proxies or custom hardware settings applied — most home setups should leave these on default/automatic.
• If the issue ever comes back later, a deeper option is to delete the network preference plist files in /Library/Preferences/SystemConfiguration/ (for example com.apple.airport.preferences.plist) and reboot. That fully resets macOS network configuration.
• Also keep macOS updated; some macOS Ventura / Sonoma Wi-Fi bugs have been patched in minor updates that improve DHCP and IP handling.
For now, if your MacBook Wi-Fi keeps the same IP and stays connected for a while, we’ve probably solved the “No IP address” problem; the extra steps above are just insurance for the future.
Customer
I don’t have any VPNs installed and my firewall is just the default macOS one. After the network location and Wi-Fi rebuild, it’s still solid. No more self-assigned IP message, and Network shows a green Connected status. I’d still like to know what to watch for so I can spot problems early if the Mac not getting IP address thing starts again.
Good question — let’s “lock in” the fix so the MacBook Wi-Fi No IP Address / self-assigned IP error is less likely to return.
Step E — Keep your MacBook getting a valid IP every time
• Leave Configure IPv4 set to “Using DHCP” unless a network admin tells you to use a manual IP. Mis-typed manual IPs are a classic cause of “No IP address” and self-assigned IP warnings.
• Keep your router firmware up to date so its DHCP server stays stable, especially if you’re using lots of devices (MacBook, phones, smart TV, console).
• If you move between home and work, use separate Network Locations (Home, Office) so one set of settings doesn’t corrupt the other.
• Avoid installing random “network optimizer” apps that try to tweak TCP/IP behind the scenes; they can leave behind bad settings that trigger self-assigned IP address problems on macOS.
• If you ever see “Wi-Fi has the self-assigned IP address and will not be able to connect to the Internet” again, you now know the quick path: check Network > Wi-Fi, confirm Using DHCP, then Renew DHCP Lease and, if needed, create a fresh Network Location.
With those habits, your MacBook Air should keep getting a proper IP address from your router without falling back to 169.254 self-assigned IPs.
Customer
Got it. I’ll leave it on Using DHCP and keep the Home location you had me create. It’s been working the whole time we’ve been chatting, no more “No IP address” messages. Thanks for explaining what the self-assigned IP thing actually means on Mac.
You’re welcome — glad we could get your MacBook Wi-Fi back online.
Summary: To fix a “MacBook Wi-Fi No IP Address” or “Wi-Fi has the self-assigned IP address” problem, make sure other devices work, then on the Mac: create a fresh Network Location, set Configure IPv4 to Using DHCP, Renew DHCP Lease, and if needed remove/re-add the Wi-Fi service or reset network preferences. Restarting the router and MacBook helps the DHCP server hand out a clean IP instead of leaving the Mac stuck on 169.254 self-assigned IP. If you ever get stuck again — random drops, “No IP address” in Network, or self-assigned IP on every Wi-Fi — you can
open a chat with an expert and we’ll walk through the steps with you live.
Customer
Perfect, everything’s working now and I understand what to check next time. I’ll definitely use chat again if my MacBook Wi-Fi starts showing “No IP address” in the future.
Any time! If a friend says their MacBook Wi-Fi has no IP address, they keep seeing self-assigned IP 169.254.x.x, or their Mac won’t get an IP address from the router, you can share this checklist — and if you’d like someone to click through Network > Wi-Fi > TCP/IP settings with you in real time, just
start a chat with an expert and we’ll take it from there.
Why MacBooks get “Wi-Fi has self-assigned IP” or “No IP address” errors
Most MacBook Wi-Fi No IP Address issues come from how the Mac talks to the router, not from your internet speed. When macOS can’t reach the DHCP server correctly, it assigns itself a self-assigned IP address (169.254.x.x), or shows “No IP address” in Network settings, which means it can’t reach the internet even though the Wi-Fi icon might show full bars.
Common reasons include corrupted network preference files, an old Network Location with bad settings, wrong TCP/IP configuration (manual IP instead of Using DHCP), or router bugs after firmware updates. Separating the path into router DHCP and clean macOS settings helps: update the router, restart it, then on the MacBook create a fresh location, use Using DHCP, and renew the DHCP lease so the router can hand out a new address.
How to tell if “No IP address” is a Mac problem, router problem, or ISP issue
To narrow down a MacBook not getting an IP address problem, start with a few quick checks:
First, see if other devices (phone, tablet, another laptop) can join the same Wi-Fi and reach websites. If they work fine while your Mac shows “Wi-Fi has the self-assigned IP address”, the issue is almost certainly with macOS network settings. If no device can get online, you likely have a router or ISP problem instead.
Next, connect your MacBook to a different network (for example your phone’s hotspot). If the error only happens on one Wi-Fi, it’s usually that router’s DHCP or security configuration. If your MacBook shows “No IP address” or self-assigned IP on every network you try, reset the Wi-Fi service, create a new Network Location, and renew the DHCP lease — those steps normally clear system-level glitches that stop macOS from accepting IP addresses from any router.
MacBook Wi-Fi No IP Address — quick troubleshooting tips
Create a fresh network location, use DHCP, and renew the IP lease on your Mac.
Fast path: confirm other devices work on the same network → in System Settings > Network, create a new Network Location → remove and re-add the Wi-Fi service → set Configure IPv4 to Using DHCP → click Renew DHCP Lease → restart the MacBook and router. In most cases this clears the self-assigned IP address state and lets your MacBook get a normal IP from the router again.
Disclaimer: This information is AI-generated and intended for general guidance only. For advice specific to your Mac model, router brand and ISP, please consult a verified expert on Whizz-Tech before making decisions.
Why does my MacBook say Wi-Fi has a self-assigned IP address or No IP address?
A MacBook Wi-Fi No IP Address or self-assigned IP message means your Mac couldn’t get an address from the router’s DHCP server. When that happens, macOS gives itself a temporary 169.254.x.x address that can’t reach the internet. This is usually caused by bad network preferences, wrong TCP/IP settings (not using DHCP), or a router/DHCP glitch that stops your Mac from getting a valid IP address.
How do I fix MacBook Wi-Fi No IP Address or self-assigned IP on macOS?
To fix MacBook not getting an IP address, go to System Settings > Network, create a new Network Location, remove and re-add the Wi-Fi service, set Configure IPv4 to Using DHCP, then click Renew DHCP Lease. Restart both your Mac and router. In most cases this clears the self-assigned IP state so the router can give your Mac a normal 192.168.x.x or 10.x.x.x address and restore internet access.
Do I need to change router settings to fix MacBook Wi-Fi No IP Address?
Often you can fix Mac Wi-Fi No IP address just by resetting macOS network settings and renewing the DHCP lease. However, if multiple devices are struggling to get IPs, your router’s DHCP range, firmware, or security settings might also need attention. Updating firmware, rebooting the router, and checking that DHCP is enabled with enough addresses available can prevent self-assigned IP issues for all devices, including your MacBook.
When should I reset network preferences or get expert help?
If you’ve renewed the DHCP lease, created a new network location, removed and re-added Wi-Fi, and rebooted everything but your MacBook still shows self-assigned IP on every network, it’s time to do a deeper reset of SystemConfiguration network preference files — or get help. A networking expert can safely guide you through deleting the right plist files, checking for hidden VPN/firewall conflicts, and confirming whether the router or ISP also plays a role.