Hi! We’ll get this “device doesn’t support router security settings” warning fixed so everything can connect securely again.
I just need a quick picture of your setup so we can target the right router security mode:
• Which device shows the error — an older Android phone, iPhone, smart TV, printer, Roku, or Windows laptop?
• What model router do you have (for example Netgear, TP-Link, ASUS, Linksys) and did you recently change anything like WPA2 to WPA3, new router, or new SSID?
• When it fails to connect, do you see messages like “this device does not support the security type”, “can’t connect to this network”, or just endless connecting?
• On other phones or laptops, does the same Wi-Fi network connect fine?
That will tell us whether we’re dealing with a WPA3-only network, WPA2/WPA3 mixed mode, TKIP vs AES issue, or an outdated device that simply can’t handle your router’s current security settings.
Customer
The message shows up on a couple of older devices. My smart TV and an old Wi-Fi printer both say “device doesn’t support router security settings” when I try to join our home network. My iPhone 14 and newer laptop connect fine. We just upgraded to a new ASUS router and turned on WPA3-Personal because it said that was the most secure option. Ever since then, the TV and printer won’t connect at all.
Got it — that explains a lot. This error is very common when you switch a router to WPA3-only or a newer security mode that older Wi-Fi adapters don’t understand.
In plain English:
• Newer phones and laptops support WPA2 and WPA3, so they’re happy with the new router security settings.
• Many legacy devices and IoT gadgets (smart TVs, printers, cameras, older Androids) only support WPA2-PSK (AES) and sometimes even older protocols.
• When your router is set to “WPA3-Personal only” or a strict mode, those devices see a Wi-Fi network they can’t understand, so they throw “device doesn’t support router’s security settings” and refuse to join.
Our goal is to keep your Wi-Fi secure while still allowing these older devices to connect. We’ll most likely switch the router to a recommended WPA2/WPA3 mixed mode or create a separate WPA2-only SSID just for older hardware.
Customer
That makes sense. I do remember setting the router’s security to WPA3-Personal only because the admin page recommended it. I didn’t realize older stuff wouldn’t work. I’d like to keep things secure but I still need the TV and printer on Wi-Fi. How do I change the router security settings without messing up all the other devices?
Perfect, we’ll adjust the wireless security type in a way that keeps strong encryption but restores compatibility.
Step A — Check your current Wi-Fi security mode
1) On a device that’s already connected (your laptop or iPhone), open a browser and go to your router’s address, typically 192.168.1.1, 192.168.0.1, or the URL printed on the sticker.
2) Log in with the router admin username and password (not the Wi-Fi password).
3) Go to the Wireless or Wi-Fi settings, then look for options like Security, Authentication, or Encryption.
4) Note what it currently says for each band (2.4 GHz and 5 GHz). On a newer ASUS router you might see options such as:
• WPA3-Personal
• WPA2-Personal (sometimes “WPA2-PSK (AES)” )
• WPA2/WPA3-Personal (Transition / Mixed mode)
Step B — Switch to compatible WPA2/WPA3 settings
5) If it’s currently WPA3-Personal only, change it to WPA2/WPA3 mixed mode (also called “Transition” mode) so WPA3 devices stay secure and older devices can fall back to WPA2-PSK (AES).
6) If your router doesn’t have mixed mode, choose WPA2-Personal (AES) — avoid any mode mentioning TKIP or WEP, as those are outdated and weak.
7) Save/apply the settings; the Wi-Fi may restart and briefly disconnect everything.
Once that’s done, we’ll try reconnecting the smart TV and printer. Other devices will reconnect automatically using the same Wi-Fi name and password, just under a more compatible security mode.
Customer
I logged in and you’re right, both bands were set to “WPA3-Personal” only. I switched them to “WPA2/WPA3-Personal (Transition Mode)” and hit apply. The Wi-Fi reset, but my phone reconnected by itself. I tried the TV again and now it asks for the password instead of showing “device doesn’t support router security settings”. The printer still fails though and says something like “this device does not support the security type”.
Great progress — the smart TV now understands the updated security type. The printer is likely even older and pickier.
Many legacy printers and smart-home devices:
• Only support 2.4 GHz Wi-Fi, not 5 GHz or 6 GHz.
• Only understand WPA2-PSK with AES and get confused by any mention of WPA3 or fancy mixed modes.
Step C — Create a WPA2-only network for older devices
1) In your router’s Wi-Fi settings, look for an option to add a Guest network or an additional SSID.
2) Create a new network name like Home-Devices-2G on the 2.4 GHz band only.
3) Set the security for this SSID to WPA2-Personal (AES) only — no mixed WPA/WPA3, no WEP, and no TKIP.
4) Choose a strong password but it can be different from your main Wi-Fi password if you like.
5) Save/apply the settings.
Then, on the printer:
• Make sure it’s in Wi-Fi setup mode.
• Choose the new WPA2-only 2.4 GHz network you created.
• Enter the password carefully (these older printers are very strict about characters).
If the printer still shows “does not support router security settings”, we’ll double-check that the SSID is really 2.4 GHz, WPA2-PSK (AES) only, and that the printer firmware is up to date.
Customer
I set up a separate 2.4 GHz guest network just like you said, with WPA2-Personal (AES) only. The printer now connects to that one without errors, and the TV is happy on the main mixed WPA2/WPA3 network. Newer phones and laptops still use WPA3 according to their Wi-Fi details. So it looks like the device doesn’t support router security settings problem is gone. Is running a separate WPA2 network safe enough?
That’s honestly the best compromise in your situation and it’s a very common setup.
Here’s the logic:
• Your main SSID uses WPA3 or WPA2/WPA3 transition mode for newer phones and laptops — that’s currently the most secure option available at home.
• Your secondary SSID uses WPA2-PSK (AES), which is still considered secure when paired with a strong, unique password.
• You’ve avoided truly weak options like WEP or WPA/TKIP, which are now considered “weak security”.
To tighten things further:
• Use a different, strong passphrase for the WPA2-only IoT network and don’t share it widely.
• If the router supports it, keep that IoT/guest network isolated from your main LAN so devices on it can access the internet and printer if needed, but not your personal computers and NAS.
• Turn off features like WPS (Wi-Fi Protected Setup) if you don’t use them, as they can weaken otherwise strong router security settings.
With this design you’re balancing security and compatibility, which is exactly what most homes need when mixing old and new Wi-Fi devices.
Customer
That all sounds good. Everything is online now and there are no more errors about unsupported security settings. If I ever replace the printer and TV with newer models, can I just switch everything back to WPA3-only for maximum security? Or do you recommend leaving the router in mixed WPA2/WPA3 mode?
Great question. Long-term, moving more devices to WPA3-Personal is ideal, but you don’t have to rush it.
A simple strategy:
• Leave the router in WPA2/WPA3 mixed mode on your main SSID for now. That lets WPA3-capable devices automatically use WPA3 while older devices continue on WPA2.
• Whenever you replace a device, make sure it explicitly supports WPA3 or at least modern WPA2-AES. Most current phones, laptops, and smart TVs do.
• Once everything you care about supports WPA3 (and you’ve retired the really old gear), you can flip the main SSID to WPA3-only and optionally delete the WPA2-only network.
Just remember that if you go too strict too soon, you’ll see this same “device doesn’t support router’s security settings” message again on any legacy gadgets you forgot about — so it’s better to phase into WPA3-only over time.
Customer
Makes sense. For now I’ll keep the main network on WPA2/WPA3 transition and a separate WPA2-only network for old devices. At least now I know what that error actually means and where to change it in the router. Anything else I should check so I don’t accidentally weaken the Wi-Fi security settings while trying to keep everything working?
Great point — it’s easy to “fix” the error by making Wi-Fi less secure, which we want to avoid.
Step D — Safe do’s and don’ts with router security settings
• Do use WPA2-Personal (AES) as your minimum security level for older devices — never go backwards to WEP or “open network”.
• Do prefer WPA3-Personal or WPA2/WPA3 mixed mode on your main SSID for phones and computers.
• Don’t enable mixed WPA/WPA2 with TKIP if you can avoid it; TKIP is outdated and can trigger “weak security” warnings.
• Do keep your router’s firmware updated — vendors regularly improve WPA3 compatibility and fix bugs where devices incorrectly report that they don’t support the security settings.
• Do set a long, unique Wi-Fi password and change the router’s admin password from the default.
With those guidelines, you’ll avoid both extremes: error messages like “device doesn’t support router security type” and genuinely unsafe Wi-Fi configurations.
Customer
Got it. I definitely don’t want to go back to WEP or anything like that, so I’m glad we found a middle ground. Everything is connected now and there are no more warnings on the TV or printer. Thanks for explaining the whole WPA2 vs WPA3 compatibility thing in normal language.
You’re very welcome — you handled it perfectly.
Quick recap: When a
device doesn’t support router security settings, it usually means the router is set to a
security type (often WPA3-only or a special mode) that the older Wi-Fi chip can’t understand. The fix is to:
• Log into the router and use
WPA2/WPA3 mixed mode or at least
WPA2-PSK (AES).
• Create a
separate 2.4 GHz WPA2 network for very old printers, TVs, and IoT devices.
• Avoid weak modes like WEP or TKIP even if a device suggests them.
If you ever get stuck again — a new gadget won’t connect, you see
“this device does not support the security type”, or a security warning you’re not sure about — you can
open a chat with an expert and we’ll walk through the exact router menus with you step by step.
Customer
Sounds good. I’ll keep this setup and reach out if I run into more router security messages. Thanks again for all the detailed help!
Any time! If a friend complains that their
device doesn’t support router security settings,
Wi-Fi won’t connect after turning on WPA3, or their smart TV can’t join the new router, you can share this checklist — and if you’d like someone to review your
router security settings in real time, just
start a chat with an expert and we’ll take it from there.
Why devices say they don’t support router security settings
Most “device doesn’t support router security settings” errors are caused by a mismatch between the Wi-Fi security mode your router uses and what that device’s wireless chip can understand. Newer routers default to WPA3-Personal or advanced mixed modes, while older printers, smart TVs, cameras, and budget Android phones often only support WPA2-PSK (AES). When the router won’t offer WPA2 in a compatible way, the device sees the SSID but refuses to connect, showing messages like “this device does not support the security type”.
There are also differences between 2.4 GHz, 5 GHz, and 6 GHz bands, and between encryption options such as WEP, WPA, WPA2, WPA3, TKIP, and AES. For home networks, the modern, widely supported baseline is WPA2-Personal with AES, with WPA3 layered on top where possible. Very old protocols like WEP and TKIP should be avoided even if a legacy device suggests them, because they are considered weak and may trigger security warnings in Windows, iOS, and Android.
How to check if the problem is the router security type or the device
To quickly narrow down a router security settings problem, compare how multiple devices behave on the same network. If new phones and laptops connect fine using WPA3 or WPA2/WPA3 mixed mode but older gear fails with “device does not support the security type”, the problem is compatibility on that specific device. If every device struggles or receives “weak security” warnings, the issue is likely the router using an outdated mode such as WEP or WPA/TKIP that should be upgraded to WPA2-AES or WPA3.
You can also log into the router and look directly at the wireless security page for each SSID and band. Make sure the options mention WPA2-Personal (AES) or WPA2/WPA3 transition mode. If the only choice is WPA3-only, consider creating a second SSID on 2.4 GHz set to WPA2-Personal for legacy equipment that does not support the newer security protocols.
Device doesn’t support router security settings — quick troubleshooting tips
Use WPA2/WPA3 mixed mode or a separate WPA2-AES network instead of lowering security too far.
Fast path: log in to your router → find Wireless / Wi-Fi security → change from WPA3-only or unusual modes to WPA2/WPA3-Personal (Transition) or WPA2-Personal (AES) → create a separate 2.4 GHz WPA2-only SSID for older smart TVs, printers, and IoT devices → reconnect those devices using the new network. This approach resolves most “device doesn’t support router security settings” and “this device does not support the security type” errors while keeping your main Wi-Fi secure.
Disclaimer: This information is AI-generated and intended for general guidance only. For advice specific to your router model, Wi-Fi devices, and security requirements, please consult a verified expert on Whizz-Tech before making decisions.
What does “device doesn’t support router security settings” actually mean?
This message usually means your router is using a Wi-Fi security type that the device’s wireless adapter doesn’t understand. For example, the router might be set to WPA3-Personal only while the device only supports WPA2-PSK (AES). In that case, the fix is to change the router security to WPA2/WPA3 mixed mode or at least WPA2-Personal so the device can negotiate a compatible connection.
How do I change my router security type to fix this error?
On a connected device, log into your router’s web interface, then go to the Wireless / Wi-Fi settings page. Look for the Security or Authentication setting and choose WPA2-Personal (AES) or WPA2/WPA3-Personal instead of WPA3-only or legacy modes. Save your changes and reconnect the problem device. Avoid WEP or WPA/TKIP, as they are considered insecure even though some older devices still offer them.
Is it safe to use WPA2 if some of my devices don’t support WPA3?
Yes, WPA2-Personal (AES) is still widely used and considered secure for home networks when combined with a strong password. If you want the best of both worlds, set your main SSID to WPA2/WPA3 mixed mode so modern devices use WPA3 while older ones fall back to WPA2. For very old gear, create a separate 2.4 GHz WPA2-only network instead of lowering your primary network to weaker modes like WEP.
What should I do if a specific device still won’t connect after changing router security?
If you’ve set the router to WPA2-Personal (AES) or mixed WPA2/WPA3 and a device still won’t connect, first check that it’s joining the right SSID and band (many legacy devices only support 2.4 GHz). Then update the device’s firmware and rerun its Wi-Fi setup. If it still says it doesn’t support the security settings, it may be too old to safely use on modern Wi-Fi; in that case, consider replacing it or using a wired connection where possible.