Samsung SmartThings printer integration — automation guide
Joe B.
Reviewed for technical accuracy
Specialities: Windows 11/10, macOS (Sonoma/Ventura/Monterey), Printers, Smart home, SmartThings, Networking
Connect a printer to Samsung SmartThings — HP, Epson, Canon, Brother (routines, Matter alternatives, notifications)
Quick answer: the accepted integration
Accepted approach for Samsung SmartThings printer integration: use an energy‑monitoring smart plug to detect printing and drive SmartThings Routines for notifications and power control. For advanced status (paper jam, toner low, job finished), deploy a lightweight LAN/webhook bridge that updates SmartThings virtual devices via the REST API or an Edge driver.
SmartThings can’t find my printer (not discoverable)
Printers aren’t exposed as native Matter devices and rarely appear in the SmartThings app as “Add device”. Instead, connect an energy‑monitoring smart plug or set up a LAN bridge that converts SNMP/IPP states to virtual switches. This gives you printing started/job complete alerts, power control, and automations across HP, Epson, Canon, Brother.
Popular SmartThings printer automations
Examples you can build in minutes: notify when printing starts or finishes, turn off printer after 30 minutes idle, flash a light strip when paper jam occurs, lock printing at night, or run a scene (“Turn on task light + open blinds”) when Printer Busy turns on. Use virtual devices so routines stay simple and reusable.
SmartThings + printers — pro tips
Best reliability comes from static IPs, local routines, and virtual devices.
Quick path: assign a static IP to the printer, install a power‑monitoring smart plug, and create Routines for start/finish. For deep status, add a tiny LAN/webhook bridge and Edge virtual devices. Avoid relying solely on cloud triggers to reduce latency and keep automations private.
Disclaimer: This information is AI-generated and intended for general guidance only. For advice specific to your environment, please consult a verified expert on Whizz-Tech before making decisions.
Getting Started Is Easy
Ask for help, 24/7
Members enjoy round-the-clock access to 12,000+ verified Experts, including tech support, mechanics, vets, and more.
Expert will respond in minutes
We match you with an Expert who specializes in your situation. Talk, text, or chat — whichever you prefer.
Save time & money
No scheduling hassles or expensive consults. Membership can save you significant time and money each month.
FAQ
Can SmartThings connect directly to my printer?
Not natively yet. Matter doesn’t currently define a printer device type. Use an energy‑monitoring smart plug for quick routines or a LAN/webhook bridge with SmartThings virtual devices for full status and automation.
How do I add a printer to SmartThings for notifications?
Plug the printer into a SmartThings‑compatible energy plug, then create Routines based on wattage: when power rises, set a Printer Busy virtual switch and send a push alert; when it drops for 2 minutes, announce Job complete and power off.
I want toner low / paper jam alerts in SmartThings — possible?
Yes, with a LAN/webhook bridge that reads SNMP/IPP status (HP/Epson/Canon/Brother) and toggles virtual sensors via the SmartThings REST API. It’s fast, private, and works locally with a hub.
Will this work without a SmartThings Hub?
For basic routines you can use cloud plugs or IFTTT Webhooks to switch SmartThings virtual devices. For local, low‑latency automations and Edge drivers, a SmartThings Hub/Station is recommended.
Brand tips for HP / Epson / Canon / Brother?
Enable SNMP/IPP, set a static IP, and keep firmware updated. HP JetDirect, Epson EcoTank, Canon UFR II, and Brother laser models report status that a SmartThings bridge can interpret for routines and notifications.
| Issue | Likely cause | Quick fix |
|---|---|---|
| Printer not discoverable in SmartThings | No native device type (no Matter) | Use energy plug + routines or a LAN/webhook bridge with virtual devices |
| Notifications are delayed | Cloud round‑trips | Prefer local Edge devices and LAN bridge; keep static IPs |
| Incorrect busy/idle detection | Power thresholds too tight | Set start > 5–10W, finish < 3W for 2–3 min; tune per model |
| Bridge can’t read status | SNMP/IPP disabled or printer uses DHCP | Enable SNMP/IPP in printer web UI; assign a static IP |
Step‑by‑step — Smart plug method (no code)
- Add a SmartThings‑compatible energy plug and name it Office Printer Power.
- In SmartThings app, create a Virtual switch “Printer Busy”.
- Routine A: When Power > 8W → turn Printer Busy = ON → send “Printing started” notification.
- Routine B: When Power < 3W for 2 min → Printer Busy = OFF → send “Job complete” → optionally turn off plug after 30 min.
Step‑by‑step — LAN/webhook bridge (advanced)
- Give the printer a static IP and enable SNMP/IPP in its web interface.
- Install a lightweight helper on a Raspberry Pi/PC/NAS to poll status and call the SmartThings REST API.
- On the hub, install Edge Virtual Switch/Contact drivers and create virtual devices for Busy, Error, Toner Low.
- Build Routines: notifications, lights, energy saving, parental schedules, and voice control through Alexa/Google/Bixby.
Sources
- Samsung SmartThings — REST API
- SmartThings — Routines
- HP — JetDirect/SNMP & support
- Epson — Support
- Canon — Remote UI & support
- Brother — Support
Filed under: Printer won’t print
Related articles
- Printer says “Offline” and won’t print — what should I check first?
- My printer “forgot” my Wi-Fi — the saved network is gone
- Printer Wi-Fi settings reset by itself — why did it forget my network?
- My printer keeps popping up “Set up Wi-Fi” again — why won’t it stay connected?
- Why does my printer need Wi-Fi setup again? It was working yesterday.
- My printer Wi-Fi setup keeps failing — what am I doing wrong?
- Printer Wi-Fi setup is confusing — why won’t it connect to my network?
- Printer Wi-Fi setup is too complicated — what do I check first without messing it up?