POS printer technician providing live chat help

Joe B.

Reviewed for technical accuracy

Specialities: Square POS, Star Micronics, Epson TM series, Networking (DHCP/IP), USB/COM ports, Cash drawers

Square receipt printer offline or not connecting — Star Micronics & Epson TM (USB, Ethernet, Bluetooth)

Technician avatar Technician
Hey! Let’s get your Square POS printer working. Tell me which hardware you have — Square Register, Square Stand, or Square Terminal — and the receipt printer model (e.g., Star TSP100/TSP143, Star mC-Print3, Epson TM‑T20, TM‑m30). Also, is the connection USB, Ethernet (LAN), or Bluetooth? We’ll check ports, drivers, and paper settings so receipts stop printing blank or not at all.
Customer
Square Stand with a Star TSP143 via USB. The printer shows Offline in the Square app and when it does print, I sometimes get blank receipt paper. Cash drawer won’t pop either.
Technician avatar Technician
Got it. Common reasons a Square receipt printer is not printing or appears Offline:
• The USB cable is power‑only or plugged into the wrong port; Square needs a data USB on the Stand/Hub.
• For Star/Epson, the wrong paper width or emulation (StarPRNT, ESC/POS) can cause blank receipts or gibberish.
• A Windows/Mac driver grabbed the device when using Square on a computer; we want the Square app to own the COM/USB interface.
• On LAN printers, the IP address changed (no DHCP reservation), so the app points to an old address or the port type isn’t Raw 9100/LPR.
• On Bluetooth, pairing exists at OS level but not inside Square, or the printer sleeps. We’ll refresh pairing and update firmware.
Customer
How do I make Square recognize the Star printer over USB and open the cash drawer?
Technician avatar Technician
Fix USB printer not printing with Square (Star TSP100/TSP143, Epson TM‑T20/TM‑m30):
1) Use the Square USB Hub or Stand’s rear USB‑A port. Replace any charge‑only cable with a certified data cable.
2) Power cycle the printer, then the iPad/Stand. In the Square app go to Settings → Hardware → Printers and choose Connect a USB Printer. You should see Star TSP100 or Epson TM‑T20.
3) Tap the printer → enable Receipts, Order Tickets, and Cash Drawer. Set Paper Width to 72/80mm as applicable.
4) If it still prints blank, install/update the StarPRNT or Epson ePOS utilities on a computer once to set emulation to ESC/POS and disable Page Mode. Then reconnect to Square.
5) Test: in Square, tap Print Test. The cash drawer should open via the DK cable after a successful receipt.
Customer
We also have an Epson TM‑m30 on Ethernet for the kitchen. Square sees it sometimes, then it goes offline.
Technician avatar Technician
Fix Square LAN/Ethernet printer offline:
• Print the network status page from the printer (hold Feed while powering on for many Star/Epson models). Note its IP address.
• In your router, create a DHCP reservation so the IP never changes. If you can’t, set a static IP within the DHCP range but outside leases.
• In Square → Hardware → Printers → Create Printer Station → choose Network Printer, then enter the IP. Prefer Raw 9100 for Star or Epson; LPR with queue name “lp” also works.
• Disable power‑saving on the switch port and ensure the printer is on the same subnet/VLAN as the POS. Avoid captive guest Wi‑Fi.
• Firmware: update via Star Quick Setup or Epson TM Utility to fix dropouts.
Customer
What about Bluetooth? Our food truck uses a Star mPOP and it keeps disconnecting.
Technician avatar Technician
Fix Square Bluetooth printer not working (Star mPOP, mC‑Print):
• Forget the printer in iOS/Android Bluetooth settings, then reboot both devices.
• Put the printer into pairing mode (usually hold Pair for 5 sec). Pair in OS settings first, then in Square → Hardware → Printers → Connect a Bluetooth Printer.
• Turn off “Auto Power Off” on the printer utility and keep the device within 2–3 meters with minimal interference.
• If receipts are blank, set emulation to StarPRNT/ESC/POS and paper width correctly; re‑pair after changes.
Customer
Labels and kitchen tickets are tiny or cut off. Is that a paper size issue?
Technician avatar Technician
Paper width & ticket scaling: In Square printer settings, set Paper Size to 72mm/80mm to match the roll. Disable scaling in Star/Epson utilities and ensure Partial Cut is enabled. Wrong width can cause blank gaps, cropped tickets, or barcodes printing too small.
Customer
If the printer disappears on our Windows laptop running Square, how do we check ports?
Technician avatar Technician
Windows/Mac with Square:
• For LAN printers, use a Standard TCP/IP Port in Windows set to Raw 9100 (or LPR “lp”). Confirm the IP pings and that the port matches the printer’s config page.
• For USB models, avoid manufacturer spooler drivers that hijack the device; let the Square POS app detect it directly. If Windows installed a conflicting driver, remove it in Print Management → All Printers/Drivers and reconnect through Square.
• On macOS, use AirPrint or driverless mode for LAN Star/Epson when possible; then add the IP inside Square.
Customer
Can we make the printer and cash drawer come back automatically after power outages?
Technician avatar Technician
Yes. Reserve the printer’s IP in your router (DHCP reservation), connect the cash drawer via the printer’s DK port, and use a UPS so the switch and printer stay powered. In Square, keep the Printer Station assigned to your device profile so it reconnects on boot.
Customer
Great — receipts are printing and the drawer opens. Anything else we should document?
Technician avatar Technician
Summary: If your Square POS printer is not printing or shows Offline, verify the connection type (USB/Ethernet/Bluetooth), set correct ports (Raw 9100/LPR), reserve the IP address, match paper width, and use the right StarPRNT/Epson ePOS settings. These steps fix most Star Micronics and Epson TM issues including blank receipts, printer not connecting, and cash drawer not opening. Need hands‑on help? Open the chat.

Quick answer: the accepted fix

Accepted fix when a Square receipt printer is not printing: confirm connection type (USB/Ethernet/Bluetooth), set the proper port (Raw 9100 or LPR “lp”), reserve the printer’s IP, match paper width, and update StarPRNT/Epson ePOS firmware/settings. Then print a test receipt from Square → Hardware → Printers.


Square printer offline after an update or router change

If your Square POS printer goes offline after network changes, it likely received a new IP address. Reprint the network status page, create a DHCP reservation, and in Square update the printer station to the new address using Raw 9100. For USB/Bluetooth, reseat cables and re‑pair inside Square, not just the OS.

How to verify printing & ports

From the printer’s self‑test, confirm IP, Subnet, and Emulation. From the POS, run Print Test. If nothing prints over LAN, telnet to IP:9100 from a laptop to confirm the Raw 9100 socket opens. For USB, the Square app should list the printer by model — if not, swap the cable/port and avoid USB hubs without power.

Square receipt printer — troubleshooting tips

Most issues are cable/port mismatches or IP changes.

Quick path: identify hardware → check USB/Ethernet/Bluetooth → verify ports and IP → set paper size → update firmware → test receipt and cash drawer. If the printer prints blank, switch emulation to ESC/POS and correct the paper width in Square.

Disclaimer: This information is AI-generated and intended for general guidance only. For advice specific to your environment, please consult a verified expert on Whizz-Tech before making decisions.


Getting Started Is Easy

Ask for help, 24/7

Members enjoy round-the-clock access to 12,000+ verified Experts, including POS and networking specialists.

Expert will respond in minutes

We match you with an Expert who specializes in Square hardware and Star/Epson printers.

Save time & money

Skip downtime and lost sales. A quick session resolves most Square printer not printing cases.

FAQ

Why is my Square receipt printer offline?

For Ethernet printers, the IP address likely changed. Reserve the IP and connect via Raw 9100 in Square. For USB, use a data cable in the correct hub port; for Bluetooth, re‑pair inside Square after deleting old pairings.

Which printers work best with Square?

Common choices are Star Micronics TSP100/TSP143, mC‑Print series, and Epson TM‑T20/TM‑m30. Use StarPRNT or Epson ePOS utilities for firmware and emulation settings.

Cash drawer won’t open with Square — what now?

Connect the drawer to the printer’s DK port, enable Open Cash Drawer in the Square printer station, and print a test receipt. The drawer opens only after a successful print.

How do I stop blank receipts?

Set the correct paper width (72/80mm) in Square, ensure the printer’s emulation is ESC/POS, and disable Windows/Mac page mode drivers that send graphics in the wrong format.

Raw 9100 vs LPR — which should I use?

Raw 9100 (a.k.a. TCP socket/JetDirect) is the simplest and most reliable for Star/Epson LAN printers. LPR with queue “lp” is a good alternative on locked-down networks.

Common Square receipt printer problems and quick fixes
SymptomLikely causeQuick fix
Printer shows Offline New IP / bad cable / wrong port Reserve IP; use Raw 9100; replace USB/Bluetooth cable and re‑add in Square
Blank or tiny receipts Wrong paper width or emulation Set 72/80mm; switch to ESC/POS; update StarPRNT/Epson ePOS
Cash drawer not opening DK not connected or print failed Plug DK cable; enable drawer in Square; print test receipt
Drops connection randomly DHCP lease change / sleep DHCP reservation; disable auto sleep; update firmware

Step‑by‑step (Windows/macOS with Square)

  1. Identify the printer model and connection (USB/Ethernet/Bluetooth).
  2. For LAN: set a Static/DHCP reserved IP, add port Raw 9100 (or LPR “lp”).
  3. For USB: connect to the Square hub/Stand; remove conflicting drivers so Square controls the device.
  4. For Bluetooth: delete old pairings and re‑pair within the Square app.
  5. Match paper width and print a test receipt; verify the cash drawer pops.

Square app (iOS/Android)

  1. Square → Settings → Hardware → Printers → Create/Select a Printer Station.
  2. Choose USB, Network, or Bluetooth and select the detected model.
  3. Enable Receipts, Order Tickets, and Open Cash Drawer.
  4. Set Paper Width to 72/80mm; run Print Test.

Sources

Matt Verified Icon
Matt ● replies in < 1 min
Technician Expert
⭐⭐⭐⭐⭐ Trusted by 27,000+ customers
Avatar
Alex · Expert's Assistant