Scan to Network Folder Broken After SMB Hardening — Fix Guide
Joe B.
Reviewed for technical accuracy
Specialities: Windows & macOS, Printers/MFPs, SMBv2/v3, Active Directory, NAS (Synology/QNAP), Security Baselines
Repair scan-to-folder after SMB hardening — SMB signing required, NTLMv1 disabled, guest access removed, minimum SMB set to v2/v3
Quick answer: the accepted fix
Accepted fix when scan-to-folder fails after SMB hardening: enable SMBv2/v3 + signing on the MFP, use a DOMAIN service account, grant Modify on share/NTFS, reference \\serverFQDN\share, ensure NTLMv2/Kerberos with correct time/DNS, and verify port 445 connectivity. Adjust encryption policy or target a compatible NAS if needed.
Why SMB hardening breaks legacy scan-to-folder (SMB1 removal, NTLMv1 disabled, signing required)
Security baselines remove SMB1, disable guest sessions, require SMB signing, and enforce NTLMv2 or Kerberos. Many older copiers speak only SMB1/NTLMv1 or cannot sign packets, so the server rejects the session. Updating firmware, selecting SMBv2/3 in the panel, and switching to a service account usually restores compliant scan-to-network folder workflows.
How to verify secure SMB scanning works
From the MFP, browse to \\serverFQDN\share using the svc_scan credentials. Confirm the device saves a test PDF/TIFF and the file ACL inherits properly. Check the server’s Security log for Event ID 4624 with Authentication Package = NTLMv2 or Kerberos and SMB signing enabled. If failure continues, test with net use from a PC on the same VLAN and compare dialects in Get-SmbSession.
Scan-to-folder — quick troubleshooting tips
Most post-hardening failures are auth/compatibility issues: SMB1 disabled, NTLMv1 blocked, signing required.
Quick path: update firmware → set SMBv2/3 + signing → use DOMAIN\svc_scan → grant Modify → use FQDN + NTP sync → verify TCP 445 → adjust encryption or point to a NAS. This sequence fixes the majority of SMB scan issues across Ricoh, Konica, Canon, Kyocera, Sharp, and HP.
Disclaimer: This information is AI-generated and intended for general guidance only. For advice specific to your environment, please consult a verified expert on Whizz-Tech before making decisions.
Getting Started Is Easy
Ask for help, 24/7
Members enjoy round-the-clock access to 12,000+ verified Experts, including tech support, mechanics, vets, and more.
Expert will respond in minutes
We match you with an Expert who specializes in your situation. Talk, text, or chat — whichever you prefer.
Save time & money
No scheduling hassles or expensive consults. Membership can save you significant time and money each month.
FAQ
Why did scan-to-folder stop after we removed SMB1?
Legacy MFPs only speak SMB1/NTLMv1. After hardening, servers accept only SMBv2/SMBv3 with NTLMv2/Kerberos and often signing, so connections are refused.
Do we need guest access for scanning?
No. Create a service account with Modify rights on the share/NTFS. Guest/anonymous is typically disabled by baselines.
How do we handle SMB encryption requirements?
Use an MFP that supports SMB 3.x encryption or target a NAS share where encryption is optional. Otherwise the server will reject unencrypted clients.
What ports and names should we use?
Allow TCP 445 and reference the file server by FQDN (for Kerberos). Keep device time synced via NTP.
| Symptom | Likely cause | Quick fix |
|---|---|---|
| Authentication failed | Guest disabled, NTLMv1 blocked | Use DOMAIN\svc_scan with NTLMv2/Kerberos |
| Server requires signing | Device not signing SMB | Enable SMB signing on MFP; update firmware |
| Cannot connect to server 445 | Firewall/VLAN ACL | Allow TCP 445 between MFP and fileserver |
| Works to NAS, not to Windows | Share policy requires encryption | Allow non-encrypted on that share or upgrade MFP to SMB3 encryption |
Step-by-step (Windows Server / NAS)
- Upgrade MFP firmware; set client to SMBv2/SMBv3 with signing enabled.
- Create DOMAIN\svc_scan; grant Modify on share and NTFS; store creds in address book.
- Use \\serverFQDN\share; sync NTP; ensure AD DNS is configured on the MFP.
- Verify connectivity with
net useandGet-SmbSession; open TCP 445.
Note for mixed environments (macOS/NAS)
- On Synology/QNAP set Min SMB = SMB2, Max = SMB3; allow NTLMv2; create a dedicated scan user.
- If encryption is mandatory on Windows shares, consider targeting a NAS share or upgrading the MFP for SMB3 encryption.
Sources
- Microsoft — SMB security (signing, encryption, NTLM/Kerberos)
- Microsoft — Windows Security Baselines
- Synology — SMB service settings
Filed under: Network security / VPN / office policies (advanced)
Related articles
- Scan to SMB Stopped Working After NTLMv1 Was Disabled — What Needs Changing and Where to Find the Settings
- Scan to Folder Fails Over SMB3 — Fix Guide
- Windows Denying Print Access After an AD Password Change — Why Cached Credentials Are the Real Problem and How to Clear Them
- Print server loses connection after GPO update — policy precedence fix
- Printer won’t print prescriptions or medical reports — it’s urgent and nothing comes out
- Chrome managed profile watermark prints wrong — policy override checks you can do safely
- Ricoh “Hold Print” enabled by AD — disable policy
- Ricoh SMB scan works but print fails — AES signing mismatch