iOS Local Network Permission Blocks AirPrint — Per App Fix Guide
Joe B.
Reviewed for technical accuracy
Specialities: iOS/iPadOS (16/17/18), AirPrint, Wi‑Fi & Networking, MDM (Intune/Jamf), Office Equipment
AirPrint not working on iPhone/iPad — allow Local Network access, fix Bonjour (mDNS) discovery
Quick answer: the accepted fix
Accepted fix when AirPrint not working (iOS/iPadOS 16/17/18): turn on the app’s Local Network access in Settings → Privacy & Security → Local Network, allow Bonjour/mDNS on your Wi‑Fi (UDP 5353), and re‑try from the share sheet. For managed devices, verify Intune/Jamf policies don’t block local network access or AirPrint payloads.
Denied Local Network permission — how to re‑enable AirPrint per app
If you previously tapped Don’t Allow, iOS suppresses discovery for that app. Go to Settings → Privacy & Security → Local Network and enable the toggle for Safari, Photos, Mail, Files, and any vendor print apps. If the app doesn’t appear, reset Location & Privacy or reinstall the app to trigger the prompt again.
How to verify AirPrint is working
Open a two‑page PDF in Files or Safari, tap Share → Print, and confirm the printer appears. If you see the device but jobs fail, check that IPP (port 631) is open and that the printer and phone share the same network. For enterprise Wi‑Fi, make sure multicast mDNS or a Bonjour Gateway is enabled.
AirPrint troubleshooting tips
Most “No AirPrint Printers Found” issues come from a denied Local Network permission or blocked Bonjour traffic.
Quick path: enable Local Network per‑app → allow mDNS/Bonjour on Wi‑Fi → test without VPN/firewall → confirm MDM policies allow AirPrint payloads. If discovery is still missing, update printer firmware and confirm AirPrint is enabled in the device’s web UI.
Disclaimer: This information is AI-generated and intended for general guidance only. For advice specific to your environment, please consult a verified expert on Whizz-Tech before making decisions.
Getting Started Is Easy
Ask for help, 24/7
Members enjoy round-the-clock access to 12,000+ verified Experts, including tech support, mechanics, vets, and more.
Expert will respond in minutes
We match you with an Expert who specializes in your situation. Talk, text, or chat — whichever you prefer.
Save time & money
No scheduling hassles or expensive consults. Membership can save you significant time and money each month.
FAQ
Why is AirPrint not working on my iPhone or iPad?
Usually the app’s Local Network permission is off or your Wi‑Fi blocks Bonjour/mDNS. Enable Local Network in Settings → Privacy & Security → Local Network, connect to the same SSID as the printer, and allow multicast (UDP 5353).
How do I enable Local Network access per app?
Open Settings → Privacy & Security → Local Network and toggle On for apps you print from (Safari, Photos, Mail, Files, HP Smart, Canon PRINT). If the app isn’t listed, try to print to trigger the prompt, or reset Location & Privacy.
I denied the prompt — how do I get it back?
Go to Settings → General → Transfer or Reset iPhone → Reset → Reset Location & Privacy, then re‑open your app and tap Allow on the Local Network request.
Does VPN or security software affect AirPrint?
Yes. Some VPNs and firewalls block multicast discovery. Temporarily disable them or add an exception for Bonjour/mDNS (UDP 5353) and IPP (TCP 631).
What about managed devices (Intune/Jamf)?
Make sure policies allow Local Network access and that AirPrint payloads are configured with the correct printer IP/queue. Exclude multicast from Per‑App VPN if used.
| Symptom | Likely cause | Quick fix |
|---|---|---|
| No AirPrint printers found | Local Network permission off; mDNS blocked | Enable Local Network; allow Bonjour/mDNS on Wi‑Fi |
| Printer visible but jobs fail | IPP blocked; wrong network/SSID | Allow TCP 631; connect devices to same SSID/VLAN |
| Vendor app works, system print doesn’t | Per‑app permission set only for vendor app | Enable Local Network for Photos/Safari/Mail/Files too |
| Works at home, not at office | MDM or guest isolation | Update Intune/Jamf profile; allow multicast/Bonjour Gateway |
Step‑by‑step (iOS/iPadOS)
- Open Settings → Privacy & Security → Local Network and enable access for each printing app.
- Ensure iPhone/iPad and the printer are on the same Wi‑Fi; avoid guest networks with client isolation.
- Temporarily disable VPN/firewall apps; allow mDNS (UDP 5353) and IPP (TCP 631).
- From the document, tap Share → Print and pick your AirPrint printer.
Step‑by‑step (macOS cross‑check)
- From a Mac on the same network, try printing via System Settings → Printers & Scanners to verify the printer advertises AirPrint.
- If the Mac can see it but iOS can’t, recheck iOS Local Network toggles and Wi‑Fi isolation settings.
- Update the printer’s firmware and confirm AirPrint/Bonjour is enabled in its web UI.
Sources
- Apple — About AirPrint
- Apple — Allow apps to find and connect to devices on your local network
- Microsoft Intune — iOS/iPadOS device restrictions
- Apple Platform Deployment — AirPrint
Filed under: Mobile printing (AirPrint / Android)
Related articles
- iOS print job vanishes after “Sending” — service restart fix
- iOS Guided Access blocks printer selection — unlock rule
- iOS AirDrop print gives washed colors — HEIF/HEIC decode pipeline fix
- iOS PDF Signatures Vanish When Printing — Annotation Flatten Fix
- iOS Safari Printing a Cropped Boarding Pass — What to Adjust Before You Head to the Airport
- iOS printing stops at “Preparing” — spool reset
- Why iOS AirPrint Prints Faded Photos and How to Fix the HDR to SDR Problem
- iOS app prints to wrong tray — AirPrint media map