How to Fix HP LaserJet 41.02.00 Unexpected Size in Tray 2 Error
Joe B.
Reviewed for technical accuracy
Specialities: HP LaserJet, tray configuration, Embedded Web Server, print policies, fleet management
Fix HP LaserJet 41.02.00 — unexpected size in Tray 2, size/type mismatch & paper settings
Quick answer: the accepted fix
Accepted fix for HP LaserJet 41.02.00 unexpected size in Tray 2: configure Tray 2 with the correct paper size and type, set guides snug to that size, ensure print jobs request the same size, and route jobs to Tray 2. Once tray settings and driver settings match, the 41.02.00 error clears.
Why HP LaserJet shows 41.02.00 “Unexpected size in Tray 2”
The 41.02.00 family of 41.xx errors is HP’s way of telling you the requested job size does not match what Tray 2 is set to or what its sensors detect. If Tray 2 is configured for A4 but the driver sends Letter, or the guides sit between marks so the printer “sees” Legal, it throws an unexpected size in tray alert to prevent misfeeds and misprints. Matching tray configuration, physical guides, and driver defaults removes the error and keeps Tray 2 reliable as your main paper source.
How to verify the 41.02.00 fix
1) Set Tray 2 to the correct size/type in the control panel or Embedded Web Server.
2) Reload a clean stack of that paper with guides snug to the edges.
3) From a test PC, print a simple one-page document that requests that same size from Tray 2.
4) Repeat from another app or user profile.
No 41.02.00 or “Unexpected size in Tray 2” message = your configuration is correct. If the error only appears for certain jobs, check those apps’ page setup or custom forms.
HP 41.02.00 — quick admin tips
Stabilize Tray 2 once and stop repeated unexpected size prompts.
• Standardize Tray 2 (e.g. Letter Plain or A4 Plain) across your environment.
• Lock defaults in the HP driver or HP Universal Print Driver so users don’t send random custom sizes to Tray 2.
• Reserve special media (labels, cardstock) for a different tray or manual feed and configure size/type accurately.
This reduces 41.02.00 tickets, wasted time at the device, and keeps your HP LaserJet fleet predictable.
Disclaimer: This information is AI-generated and intended for general guidance only. For model-specific limits and safety information, always confirm with HP documentation or a verified expert on Whizz-Tech.
Getting Started Is Easy
Ask for help, 24/7
Members get round-the-clock access to verified HP LaserJet and print management Experts ready to fix tray errors like 41.02.00.
Expert will respond in minutes
Share your HP model and 41.02.00 behavior. An expert will map your tray settings and driver configuration step-by-step.
Save time & money
Eliminate repeated “unexpected size in Tray 2” interruptions and keep users printing instead of standing at the device.
FAQ — HP LaserJet 41.02.00 Tray 2
What does HP LaserJet 41.02.00 “Unexpected size in Tray 2” mean?
It indicates a mismatch between the paper size requested by the job and the size configured or detected in Tray 2. The printer pauses so you can correct the tray settings or job.
How do I stop 41.02.00 from appearing every time?
Set the correct size and type for Tray 2 in Tray Settings, adjust paper guides to that size, and ensure drivers and apps use the same paper size when pulling from Tray 2.
Can switching between Letter and Legal cause 41.02.00?
Yes. If you change the actual paper but don’t update Tray 2 size in the menu, or leave guides between sizes, the device logs an unexpected size in tray error.
What if 41.02.00 persists after fixing guides and settings?
Update firmware, confirm EWS tray settings, and test from a clean driver. If it still persists, a tray size sensor or hardware fault is likely — consult HP or an expert.
| Symptom | Likely cause | Quick fix |
|---|---|---|
| 41.02.00 on every Tray 2 job | Tray 2 size configured incorrectly | Set correct size/type for Tray 2 in Tray Settings |
| “Unexpected size in Tray 2” after reload | Paper guides between size marks or mixed media | Reload one size only, snug guides to stack |
| Error only from certain applications | App forcing wrong paper size | Match app page setup to Tray 2 size or choose correct tray |
| Intermittent 41.02.00 despite correct setup | Possible tray sensor/flag issue | Run diagnostics; contact HP/technician for hardware check |
Step-by-step: clear HP 41.02.00 for Tray 2
- On the printer panel, open Tray Settings / Paper Handling and set Tray 2 size and type to match the loaded paper.
- Remove the stack, fan it, reload, and slide guides firmly to the correct marks (Letter, A4, Legal, etc.).
- In the HP driver or HP Universal Print Driver, set default paper size to match Tray 2 and select Tray 2 as the source.
- Print a one-page test from multiple apps to confirm no 41.02.00 unexpected size in Tray 2 message appears.
Note for macOS & mixed environments
- On macOS, verify the print dialog uses the same paper size as Tray 2 and does not override with a custom form.
- In shared/enterprise setups, standardize tray configuration via EWS and push consistent defaults via print server or management tools.
Sources
- HP Support — 41.xx Errors overview
- HP Support — Unexpected size in tray X
- HP Support — Interpret control-panel messages (41.x series)
Filed under: Paper handling & media (jams/feeds/duplex)
Related articles
- How to Fix Kyocera JS7220 Finisher Tray Full Error That Won't Reset
- How to Fix a Citizen CL-S621 Media Sensor Error That Keeps Coming Back
- How to Fix Mirrored and Rotated Labels Using ZPL and TSPL Rotation Commands
- Xerox “016-747” — Tray size detection error (paper size mismatch)
- Xerox 004-346 tray size sensor failure — stop false size errors
- Printer says “Paper Jam” but the tray is empty — what should I check first?
- Lexmark “37.01.05” — paper feed stalled in Tray 1/2 — step-by-step fix
- Humidity Warps Paper — Storage & Tray Settings Fix Guide