Web technician diagnosing Next.js SSR hydration styling issues where input borders disappear in print or after client hydration

Joe B.

Reviewed for technical accuracy

Specialities: Senior-friendly printer help, printer won’t power on, no lights/blank screen, power cord/outlet checks, surge protector issues, safe power resets.

Common reasons a printer won’t power on — and what to check first (outlet, cord, lights, safe reset)

Technician avatar Technician
Hi! If your printer won’t turn on and you’re not sure why, we’ll keep this calm and simple. Most “no power” printer problems come from the power source (outlet, power strip, cord) or the printer being “stuck” in a low-power state.

Trust moment: I don’t want you opening the printer, taking it apart, or pressing random reset combinations. We’ll do the least risky checks first.

Quick questions: what brand is it (HP, Canon, Epson, Brother), and do you see any lights at all—screen, buttons, or a tiny power light?
Customer
It’s a Canon. No lights. The screen is totally black. I press the power button and nothing happens. I’m worried it died.
Technician avatar Technician
I understand—that’s a scary moment, especially if you need to print something important.

First, a safety check: do you smell anything unusual (hot plastic/burning), or is the printer completely normal—just not turning on? If there’s any smell or the unit feels very hot, stop and unplug it.
Customer
No smell, not hot. It just won’t start. It was fine last week.
Technician avatar Technician
That “fine last week” detail helps. Power issues often start suddenly after something small changes—like the printer being moved, a power strip switched off, or a wall outlet controlled by a light switch.

What is it plugged into right now: a wall outlet, a power strip, or a surge protector?
Customer
A surge protector under the desk. I use that for my computer too.
Technician avatar Technician
That’s common—and it’s also a common reason seniors see “no power.” Some surge protectors have a tiny reset/breaker button, or one dead socket while others still work.

Safe check: can you confirm the surge protector itself is on (lighted switch), and then try the printer’s plug in a different socket on the same strip—just as a test?
Customer
The strip light is on. I moved the plug to another socket. Still nothing.
Technician avatar Technician
Good, that rules out one easy cause.

Next safe check (still no settings): please look at both ends of the power cord. One end at the wall/strip, and the other end where it plugs into the printer. Some cords feel “in” but are not fully seated.

Also: does your Canon use a simple cord, or does it have a small power “brick” (adapter) in the middle?
Customer
No brick, just a cord. It looks plugged in, but I can push it a little more into the back of the printer.
Technician avatar Technician
That’s a very common “it worked yesterday” situation—cord slightly loose after cleaning or moving things.

Trust moment: we’ll avoid anything aggressive. One helpful, safe step is to unplug the printer from power for a short while to let the internal electronics fully settle, then try again—no factory reset involved.

Before we do that, one more question: when you press the power button, do you hear any sound at all (a click, faint fan, or nothing)?
Customer
Nothing. No click, no noise. Just dead.
Technician avatar Technician
Okay. In that case, the best “first move” is to confirm the outlet path is truly delivering power to the printer.

Safe check: can you plug the printer directly into a wall outlet (not the surge protector) just for testing? Some homes also have outlets controlled by a wall switch—if there’s a nearby switch, make sure it’s on.
Customer
I tried a wall outlet across the room. Still dead. I didn’t think about the wall switch thing before.
Technician avatar Technician
You’re doing the right checks. Since it’s still showing no lights in a known wall outlet, we’re narrowing it down to: power cord not making good contact, the power button not being recognized, or an internal power supply issue.

Quick “when it started” question: did anything happen right before this—storm/power outage, moving the printer, or plugging it into a different socket?
Customer
We had a brief power outage two days ago. After that, it never turned on again.
Technician avatar Technician
That’s a very common pattern after an outage. Sometimes the printer’s internal protection circuitry stays “latched” until power is removed long enough.

Safe step-by-step guidance (without a full “do this and it’s fixed” promise): unplug from the wall, wait a few minutes, then reconnect and try the power button again. Some printers also respond better if you press and hold the power button for a few seconds rather than a quick tap.

Another gentle check: if a USB cable is connected to a computer, disconnect it for now. It usually doesn’t cause “no power,” but it helps reduce confusion while testing.
Customer
Okay. I can do that. I was scared to “mess it up,” so I didn’t want to touch anything.
Technician avatar Technician
That makes complete sense. Trust moment: the steps we’re talking about are the safest ones—checking power, waiting, and trying again. We’re not changing settings or doing anything that could “ruin” the printer.

If, after these safe checks, there are still zero lights and no sound, the next question becomes model-specific (some Canons have different power button behavior or a separate power switch area). If you share the exact Canon model name/number, I can help you confirm the correct “no power” checks for that model and how to tell whether it’s likely the cord/outlet or the printer hardware.
Customer
Thank you. I feel calmer. I’ll find the model number and try the safe checks first.

Quick answer: the accepted fix (safe checks before repairs)

Accepted fix for printer won’t turn on: start with low-risk power checks to avoid unnecessary stress or damage.

• Test a different wall outlet (avoid surge protectors for the test) and watch for any lights at all.
• Reseat the power cord firmly on both ends and inspect for visible damage (kinks, fraying).
• If there was an outage, unplug for a few minutes, then reconnect and try a longer press on the power button.
• Make sure the outlet isn’t controlled by a wall switch or timer.
• If there are still no lights and no sound, it may be a cord issue or internal power hardware—model-specific checks help next.


Why a printer won’t power on (common reasons) — and what’s safe to try first

For many older users, “no power” turns out to be something simple: a switched-off power strip, a loose cord, a wall outlet controlled by a switch, or a surge protector that stopped working after a power event. After a brief outage, some printers also need a clean power disconnect before they respond again.

Safe steps are external checks only: outlet, cord, and a gentle wait-and-retry. Avoid opening the printer, using untrusted replacement chargers, or forcing parts. If the printer shows any lights, even briefly, that’s an important clue you can share for more accurate guidance.

What to check first for “no lights / blank display” (Canon, HP, Epson, Brother)

Start with the basics you can see: does the power button light up, does the screen stay black, and do you hear any sound at all. Try a known-good wall outlet and bypass the surge protector for testing. Check that the cord is fully seated at the printer and the outlet, and look for damage.

If the printer has a separate power switch or uses a power adapter, confirm that part is connected properly. If there’s still no response after safe checks—especially after an outage—it may be a hardware power issue and may need brand/model-specific troubleshooting.

If you’re unsure, don’t force anything — check the power source first

A calm, simple power check prevents extra problems.

Try a different wall outlet, bypass the surge protector for the test, and reseat the cord on both ends. Watch for any tiny light or screen flicker, and listen for a click or fan. If there’s a strange smell or heat, unplug and stop. If you share the printer model, you can get safe, step-by-step guidance without risky resets.

Disclaimer: This information is AI-generated and intended for general guidance only. For advice specific to your printer model and home/office setup, please consult a verified expert on Whizz-Tech before changing system settings.


Getting Started Is Easy

Ask for help, 24/7

Members get round-the-clock access to certified Experts for senior-friendly printer issues like no power, blank display, outlet/cord checks, and safe next steps by brand and model.

Expert will respond in minutes

Get calm guidance on what to check first (outlet, surge protector, cord, power button, lights) without confusing jargon or risky actions.

Keep it safe and simple

Follow a low-risk checklist first, then decide the next step with confidence—especially after a power outage or sudden “no lights” problem.

FAQ

Why did my printer stop turning on all of a sudden?

This often happens after a brief power outage, surge protector issue, or the printer being moved and the cord loosening. Sometimes the outlet is controlled by a wall switch, so it looks like the printer “died.” A safe first check is trying a different wall outlet and reseating the cord. If there are still no lights, note that detail for model-specific troubleshooting.

After an update, could my printer stop powering on?

Software updates usually don’t cause a true “no power” problem with zero lights, because that’s electrical, not software. What can happen is the printer goes to sleep and looks off, or the screen stays dim until you press the correct button. If your printer has absolutely no lights or sounds, focus on outlet and cord checks first. If it powers on but won’t print after an update, that’s a different issue (drivers/settings).

Is this a hardware problem or a settings problem?

If there are no lights and no sounds, it’s usually not a settings issue. It’s more likely power delivery (outlet, power strip, cord) or internal power hardware. If you see lights but it won’t print, that’s often settings, connection, or print queue. The presence or absence of lights is the key clue.

Can this be fixed without taking the printer to a service shop?

Sometimes, yes—many cases are solved by correcting the power source and reseating the cord. A safe unplug-and-wait can also help after an outage. If the printer remains completely dead in multiple outlets, it may need a replacement cord or hardware service. Sharing the printer model helps determine the safest next step without guesswork.

Sources

Matt Verified Icon
Matt ● replies in < 1 min
Technician Expert
⭐⭐⭐⭐⭐ Trusted by 27,000+ customers
Avatar
Alex · Expert's Assistant