IT technician helping fix macOS shared printer password prompts and Keychain trust issues

Joe B.

Reviewed for technical accuracy

Specialities: macOS printing & shared printers (SMB/Bonjour/AirPrint/IPP), “hold for authentication”, password prompts on every print.

Why macOS shared printers ask for a password every time: Keychain trust, cached credentials, SMB/IPP auth, and “hold for authentication”

Technician avatar Technician
Hi! We can fix the macOS shared printer asks password always issue, but the best solution depends on where the password prompt is coming from. On Macs, repeated printer password pop-ups usually fall into one of these buckets:

• Keychain credentials mismatch (a saved “network password / internet password” for the print server or SMB share is wrong, expired, or saved under the wrong account).
• Printer queue authentication (“Hold for authentication” in the print queue, or macOS asks for username/password each job).
• Connection method changes (printer was added via SMB one time, then later via IPP/AirPrint/Bonjour, so credentials don’t line up).
• Keychain trust / login keychain problems (Keychain doesn’t reliably store credentials, keeps re-prompting, or got out of sync after a password change).

Quick questions so I can give you the exact steps (and we’ll keep it clean—no breaking your printer setup):
1) Which macOS version are you on (Ventura / Sonoma / Sequoia or other)?
2) Is this a shared printer from a Windows PC / Mac / NAS / print server, or a network printer on the LAN?
3) Do you see the job stuck as “Hold for Authentication” in the printer queue, or do you just get a password pop-up?
4) Is the username/password your Mac login, or a separate network/AD account?

Reply with those details and I’ll walk you through a step-by-step fix: remove the wrong saved printer password from Keychain, re-save the correct one, and if needed do a safe Keychain trust reset for the login keychain so the prompt stops permanently.
Customer
I’m on macOS Sonoma. It’s a shared printer from the office network. Every time I print, macOS pops up asking for the printer password again. I enter it and it works for that job, but it comes back the next time. Sometimes the queue says “Hold for Authentication”.
Technician avatar Technician
Perfect — “Hold for Authentication” plus repeated prompts strongly suggests macOS is either (a) using saved credentials in Keychain that are wrong/outdated, or (b) not saving the credentials at all due to a login keychain trust/sync issue.

Let’s fix this the right way (so it doesn’t return tomorrow). We’ll start with the most common cause: a bad saved password entry in Keychain for the print host / share name.

Step 1 — Identify what macOS is authenticating to
Open the print dialog once and note what the prompt says (it may reference a server name like PRINTSERVER, an IP address, or an SMB path). This matters because the Keychain item is usually stored under that exact hostname/IP.

Step 2 — Remove the wrong saved printer credential from Keychain Access
On your Mac, open Keychain Access and search for:
• the printer name (friendly name),
• the print server hostname, or
• the IP address (if it’s printing to an IPP/LPD endpoint).

You’re typically looking for an entry under “Internet Password” or “Network Password” related to printing, SMB, or the server hosting the shared printer. If the password is wrong, macOS will keep prompting you forever.

Before we delete anything: do you know if this printer is shared from Windows (SMB), from another Mac, or from a print server like PaperCut/Windows Print Server?
Customer
I think it’s a Windows print server. The prompt shows the server name, not the printer model. And yes, I have an office username/password that’s separate from my Mac login. I’ve changed that office password recently.
Technician avatar Technician
That explains it — when you change the Windows/AD password, macOS often keeps trying the old one from Keychain. The result is exactly what you see: macOS printer keeps asking for password, jobs pause, and the queue flips to authentication required.

Here’s the clean fix path for a Windows print server / shared printer (SMB-style auth):

Step A — Delete the stale printer/server credentials (Keychain)
1) Open Keychain Access → select the login keychain.
2) In the search box, type the print server name you saw in the pop-up (example: PRINT-SRV-01).
3) Look for entries that match that server (often “Network Password” / “Internet Password”). If you see multiple entries for the same host, that’s common after password changes and can cause looping prompts.
4) Delete the entries that clearly reference the print server / printer share. (We’re removing the old cached credentials so macOS is forced to re-ask and re-save the correct ones.)

Step B — Trigger one fresh authentication prompt and save it correctly
1) Print a small test page again.
2) When the password prompt appears, enter your updated office password and make sure any option like “remember/save in Keychain” is enabled (wording varies).
3) The job should release from “Hold for Authentication” and future jobs should stop prompting.

If it still prompts every time after this, that’s when we move to the next layer: a Keychain trust reset (login keychain not saving credentials reliably). Do you notice other saved passwords failing too, or is it only printing?
Customer
It’s mostly printing. Safari and other logins are fine. But for printers and sometimes an SMB shared folder, it asks again after I reboot. I did check “remember in keychain” before, but it still comes back.
Technician avatar Technician
That pattern (printers + SMB share asking again after reboot) points to a very specific macOS issue: the credential is either being saved under a different “scope” than you expect (wrong server/hostname), or the login keychain trust is partially out of sync for network credentials.

Let’s do two things in a safe order: first make sure we’re storing the right credential item, then (only if needed) do a controlled reset default keychains to rebuild Keychain trust for network passwords.

Step 1 — Clean out only the relevant network credentials (not your whole Keychain yet)
In Keychain Access, search for each of these related keywords / items that often cause repeated prompts:
• the print server hostname
• the SMB server name (if your file share uses the same Windows server)
• entries that show as “Network Password” and match your office username

Delete the stale items for that host. Then restart the Mac (this helps macOS re-negotiate auth) and try one print + one SMB mount so macOS creates fresh entries.

Step 2 — Verify the username format macOS is using
If the office environment uses AD, the correct format can matter: DOMAIN\\username or username@domain. If macOS saves one format but the server expects the other, you can get repeat prompts even with the right password.

When the printer password prompt appears, what username does it show (if any)? Is it your short name, domain\\user, or user@domain?
Customer
The username field shows my short username, no domain. If I type DOMAIN\username it works for that print, but then it still asks again next time. Also, I see multiple keychain entries for the same server name.
Technician avatar Technician
Multiple entries for the same server is the classic “loop” trigger. macOS may grab the wrong one, fail, then re-prompt — even if you keep entering the correct password. This is why simply typing the password over and over doesn’t stick.

Here’s how to stabilize it so the printer password prompt stops permanently:

Fix 1 — Remove duplicates and keep one clean credential
1) In Keychain Access, search the print server hostname.
2) Sort by Name or check details so you can see which entries match the same host.
3) Delete the duplicates for that host (especially any that reference the old password or an old username format).
4) Keep the Keychain window open for now — we want to confirm macOS creates exactly one fresh credential after the next step.

Fix 2 — Re-auth once, using the final username format
1) Print again to trigger the prompt.
2) Enter username as DOMAIN\\username (or username@domain, whichever your IT uses consistently).
3) Enter the password and ensure “remember/store in Keychain” is enabled.

Fix 3 — If it STILL asks every time, do a Keychain trust reset (targeted)
This is the “Keychain can’t keep network passwords” scenario. We do it only after we’ve cleaned duplicates because it’s more disruptive. The safest Apple-supported approach is to reset the default keychains from within Keychain Access settings, which rebuilds the login keychain structure so saves stick again.

Before we do that: after you delete the duplicates, do you still get prompted on the very next print, or only after reboot/sleep?
Customer
After deleting duplicates it worked twice, then after my Mac slept it asked again. I want the permanent fix. I’m okay doing a Keychain reset if it doesn’t break everything.
Technician avatar Technician
Totally fair — let’s do the permanent path, but in a controlled way so you don’t get surprised. Two important notes first:

• A Keychain trust reset can remove saved passwords (you may have to re-enter some app/site passwords later).
• We’ll only do this if your Keychain is failing specifically for network passwords (printers/SMB) and the “clean duplicates” fix didn’t hold.

Here’s the Apple-supported workflow that usually fixes macOS keeps asking for printer password after sleep/reboot because the login keychain won’t save properly:

Step 1 — Reset Default Keychains (Keychain trust reset)
1) Open Keychain Access.
2) Go to Keychain Access > Settings (or Preferences on older macOS).
3) Click Reset Default Keychains.
4) Sign out/in when prompted (or restart) to complete the reset.

Step 2 — Re-save the printer credentials one time
After you log back in:
• Print once to trigger the auth prompt.
• Use the correct AD format (DOMAIN\\username or username@domain).
• Ensure “remember/store in Keychain” is selected.

Step 3 — Verify the printer connection method (important related keyword: SMB printer authentication)
If this printer was added as an SMB shared printer, it can be more sensitive to credential caching. If your office supports it, adding via IPP/AirPrint/Bonjour can reduce password prompts. We won’t change your setup unless necessary, but it’s a useful fallback if the server expects modern auth.

If you want, tell me the printer’s “Kind” in System Settings → Printers (AirPrint vs Generic PostScript vs something else). That helps confirm the best long-term connection method.
Customer
The printer shows up as a shared printer and I think it’s using SMB. After the reset, will it also fix the SMB file share password prompts? And what if the print jobs still get stuck “Hold for Authentication”?
Technician avatar Technician
Yes — if the underlying issue is “Keychain won’t reliably store network passwords,” then a Keychain trust reset typically helps both SMB share keeps asking for password and shared printer keeps asking for password, because both rely on the same saved credential mechanism.

If print jobs still land in Hold for Authentication afterward, we do a focused follow-up (no guessing):

1) Confirm the saved credential item is being created
After your first successful print, open Keychain Access and search the print server hostname again. You should see one fresh “network password/internet password” item. If it’s not created, macOS can’t save it (permissions/trust issue) — which the reset usually fixes.

2) Force macOS to ask once, then stop
If a job is paused, open the printer queue and resume/refresh so it prompts, then enter the correct DOMAIN\\username + password and save it. Once the correct credential exists, jobs stop pausing.

3) Avoid duplicate endpoints (related keywords: print server hostname vs IP, SMB vs IPP)
If the same printer exists twice (once by hostname and once by IP), macOS might store credentials for one endpoint while printing to the other. We want the printer to consistently use one server name/IP so Keychain matches it every time.

If you tell me the exact server name shown in the password pop-up, I can tell you precisely what Keychain entries should exist (and which ones to delete).
Customer
I’m worried about resetting Keychain because I don’t want to lose everything. Is there a less drastic way to “reset trust” just for the printer credentials?
Technician avatar Technician
Absolutely — and that’s a smart question. For many users, you can fix the “asks every time” problem without a full reset by doing a targeted Keychain cleanup + one clean re-save.

Try this less disruptive “trust refresh” approach first (works well for macOS shared printer password prompt and SMB password pop-up):

Targeted fix (no full Keychain reset)
1) In Keychain Access (login keychain), delete only entries that match the print server/SMB host (and any duplicates).
2) Restart the Mac (this clears certain cached auth states).
3) Mount the SMB share once and tick “remember in Keychain” (if offered), using DOMAIN\\username or username@domain.
4) Print once and do the same — one prompt, saved once, done.

If the prompt returns after sleep/reboot even after this targeted cleanup, that’s the signal that your login keychain is not keeping network credentials reliably, and then Reset Default Keychains becomes the clean permanent solution.

If you’d like, we can do this in the fastest safe order in chat: I’ll have you confirm the exact Keychain item name (server hostname) so you only remove what’s relevant and avoid touching unrelated saved passwords.
Customer
Can you summarize the best fix steps as a checklist? I want to stop the printer asking for password always, and also fix the SMB file share prompts.
Technician avatar Technician
Absolutely — here’s the practical checklist for macOS shared printer asks password always (plus SMB share prompts), in the order that fixes most cases quickly:

Checklist: stop repeated printer password prompts on macOS
1) Identify the exact server name shown in the password pop-up (that’s the Keychain lookup key).
2) Open Keychain Access → select login keychain → search the server hostname/IP and the printer share name.
3) Delete stale/duplicate entries for that host (network password/internet password).
4) Restart the Mac.
5) Print once, enter credentials as DOMAIN\\username (or username@domain), and ensure “remember/store in Keychain” is enabled.
6) Test sleep/reboot. If it returns, proceed to the permanent fix:

Permanent fix: Keychain trust reset (only if needed)
7) Keychain Access → Settings/Preferences → Reset Default Keychains → sign out/in (or restart).
8) Re-save SMB + printer credentials one time (correct format), then confirm only one fresh Keychain entry exists for the server.

If you want, start a chat and tell me the server hostname + whether the printer is added via SMB or IPP/AirPrint, and I’ll give you the exact “delete this / keep that” Keychain guidance so you don’t over-delete.

Quick answer: the accepted fix

Accepted fix for macOS shared printer asks password always: remove stale/duplicate print-server credentials from Keychain Access (login keychain), then print once and save the correct DOMAIN\\username + password. If prompts return after sleep/reboot, use Keychain Access settings to Reset Default Keychains to restore Keychain trust, then re-save printer and SMB credentials one time so “Hold for Authentication” stops.


Why macOS shared printers keep asking for a password: Keychain trust, cached SMB credentials, and authentication-required print queues

When a shared printer keeps asking for a password on Mac, it’s usually because macOS is using a cached credential from Keychain that no longer matches your current Windows/AD password, or it saved multiple entries for the same print server and keeps selecting the wrong one. This often shows up as printer “Hold for Authentication”, repeated password pop-ups, or a network printer that works once and then prompts again after sleep or reboot. A targeted cleanup of the relevant network password items in Keychain fixes most cases; a Reset Default Keychains can resolve deeper Keychain trust problems where network credentials won’t persist.

The most stable approach is: delete stale/duplicate Keychain entries → re-authenticate once using the correct username format → confirm the printer uses a consistent server hostname/IP → optionally switch from SMB to IPP/AirPrint if supported by your environment.

Fast diagnosis checklist: Keychain mismatch vs printer connection method (SMB vs IPP/AirPrint)

If the password prompt references a server name and your SMB share also prompts, it’s usually a Keychain network password mismatch (especially after a password change). If the printer appears twice (hostname + IP), macOS may store credentials for one endpoint while printing to another. If you can add the printer using IPP / AirPrint / Bonjour instead of SMB printing, it can reduce repeated credential prompts because authentication flows differ. For environments that require credentials, keeping a single correct Keychain entry (no duplicates) is the key to stopping repeated prompts.

This helps you avoid re-adding printers repeatedly and gets you to a permanent fix faster.

macOS printer password prompts — quick troubleshooting tips

Clean Keychain duplicates first, then reset Keychain trust only if prompts return after sleep/reboot.

Fast path: in Keychain Access, delete stale/duplicate entries for the print server hostname, restart, then print once and save the correct DOMAIN\\username + password. If you still get “Hold for Authentication” after sleep/reboot, use Keychain Access settings to reset default keychains and re-save network credentials one time. If your office supports it, using IPP/AirPrint instead of SMB sharing can reduce recurring authentication prompts.

Disclaimer: This information is AI-generated and intended for general guidance only. For advice specific to your network/AD policy and print server settings, please consult a verified expert on Whizz-Tech before changing security settings.


Getting Started Is Easy

Ask for help, 24/7

Members get round-the-clock access to certified Experts for macOS printing, shared printers, Hold for Authentication, SMB/IPP/AirPrint setup, and fixing a printer that keeps asking for a password due to Keychain credential issues.

Expert will respond in minutes

We match you with a specialist who can locate the exact Keychain entries causing repeated password prompts, fix username format issues (DOMAIN\\user vs user@domain), and stabilize shared printer authentication on macOS.

Save time & stop repeated prompts

Stop re-entering passwords for every print job. Get a structured checklist for Keychain cleanup, Keychain trust reset, and the best printer connection method for your office network so printing works reliably after sleep and reboot.

FAQ

Why does my Mac keep asking for the shared printer password every time I print?

This usually happens when macOS has an outdated or duplicated Keychain credential for the print server (common after a Windows/AD password change). The printer queue may show “Hold for Authentication” and re-prompt each job until the stale Keychain entries are deleted and a single correct credential is saved.

What does “Hold for Authentication” mean on macOS print queue?

It means the print system is waiting for valid credentials to authenticate to the print server or shared printer. Removing the wrong Keychain entry and re-saving the correct DOMAIN\\username (or username@domain) password usually releases the job and stops future holds.

How do I delete the saved printer password from Keychain Access?

Open Keychain Access, select the login keychain, search the print server hostname/IP or printer share name, then delete the matching network/internet password entries. Print again to re-enter and save the updated credentials.

Should I reset default keychains to fix printer password prompts?

Only if targeted Keychain cleanup doesn’t hold after sleep/reboot. Resetting default keychains can restore Keychain trust when network passwords (printers/SMB) refuse to persist, but you may need to re-enter some saved passwords afterward.

Sources

Matt Verified Icon
Matt ● replies in < 1 min
Technician Expert
⭐⭐⭐⭐⭐ Trusted by 27,000+ customers
Avatar
Alex · Expert's Assistant